TRAINING GAS DEHYDRATION AND GLYCOL REGENERATION

Training Dehidrasi Gas Dan Glycol Regeneration

Training Pengenalan Gas Dehydration And Glycol Regeneration

INTRODUCTION :
The natural gas industry has recognized that dehydration is necessary to ensure smooth operation of gas transmission lines. Dehydration prevents the formation of gas hydrates and reduces corrosion. Unless gases are dehydrated, liquid water may condense in pipelines and accumulate at low points along the line, reducing its flow capacity. Therefore, the removal of the water that is associated with natural gases in vapor form is one critical step in gas processing scheme. Several methods have been developed to dehydrate gases on an industrial scale. The three major methods are: direct cooling, adsorption and absorption. Glycol and methanol injection, glycol dehydration contactor, and glycol regeneration are important issues in gas production operations.

TRAINING MATERIAL OUTLINE :
1. Overview of the Production of Transportable and Salable Gas
2. Legal and Safety Requirements in Gas Fuel Market
3. Reservoir Fluid Type and the Hydrocarbon PVT Diagram
4. Prevention of Hydrate Formation and the Dehydration Processes
5. Hydrate Inhibitor and the Methanol and Glycol Injection
6. Injection System and the Low Temperature Separation
7. Dehydration in Contactor Column and Glycol Regeneration
8. Contactor and Regenerator Plant Operation and Controls
9. Glycol Conditioning and Glycol Losses Control
10. Plant Maintenance and Troubleshooting

INSTRUCTOR :   Ir.Hilman Ahmad,DCE.and Associates

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

• batch 1 : 24 – 26 Januari 2023
• batch 2 : 14 – 16 Februari 2023
• batch 3 : 20 – 23 Maret 2023
• batch 4 : 4 – 6 April 2023
• batch 5 : 15 – 17 Mei 2023
• batch 6 : 26 – 28 Juni 2023
• batch 7 : 17 – 19 Juli 2023
• batch 8 : 14 – 16 Agustus 2023
• batch 9 : 25 – 27 September 2023
• batch 10 : 10 – 12 Oktober 2023
• batch 11 : 7 – 9 November 2023
• batch 12 : 5 – 7 Desember 2023

Investasi dan Lokasi pelatihan:

• Yogyakarta
• Jakarta
• Bandung
• Bali
• Surabaya
• Lombok

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas :

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
• Module / Handout
• Flashdisk
• Sertifikat
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive
• Training room full AC and Multimedia